But The top Train Channels is what I'm interested in talking about at this time. If The Bottom Train Channels 3 Tracks Can Handle The Cargo That Is Moving All Over The Nation, Then The Top 6 Tracks Can Be Used For Mass Transit Of Moving People About This Nation.

The Upper 3 Top Train Tracks Are Built Upon Steel Frames That Cross The upper open 50 Foot area, for each direction. The Upper Top 3 tracks Are not made The Same As the Bottom Channel  3 Train Tracks.

The Bottom Channels 3 Sets Of Tracks Move Large Long Heavy Trains.

The 3 Upper and 3 Lower Top Train Channel Tracks Can Be Used Only For moving people About.

I Believe The Lord Has Made It plain To Me, That a Vehicle In The Train Track Area Will Be Able To Cross The United States In One Hour, In This High Speed Transit Area.

I Believe It will Travel In A Vacuum Tube Like Track, Reducing Friction and Resistance. The Vehicle Will Be Bus Like(For Passengers)  and Propelled By Individual Power (Maybe Related To The Tunnel). Space Technology Will Be Applied. A Shuttle Craft Like Without Wings Will Speed At Near 4000 MPH Through These Tunnels, Connecting East and West Coast.

The Inner Most Tracks Of The upper and lower Top train Channels Will Be For The Fastest Track Vehicle.

The Middle Track Will Be For Slower Vehicles, and Of Coarse The Outside Will Be For The Slowest.

The High Speed Vehicle Will Be Stationed Between Tracks That Are Above and Below, Eliminating Flying off The Track At Orbital Speeds. Even Though The Track Will Be Flat To The Bubble Of A level, In Actuality The Track Is Curving To The Earth's Surface. That Would Be necessary To figure At Such a Large Distance and Speed.

The High Speed Train Vehicle Presently Won't Reach The Speed Of  4000 MPH, But That Speed Should Be Kept In Mind and The High Speed Tunnels Designed To Handle That Speed During Construction. The Speed I Believe Will Get There Soon Enough, Moving The Masses To and Fro About The Planet.

A Scenario

A Vehicle (Shuttle Craft) Will Be Loaded At A Train Station. The Door Will Seal Shut To the Shuttle Craft. Then The Air Lock Will Seal Shut On The Track's Tube Like Track. Then The Shuttle Craft Starts Picking Up Speed and Arrives On The Opposite Coast Of The United States One Hour Later.

The Shuttle Craft Then Stops At The Unloading Dock. The Air Lock To The Shuttle Craft Seals of The Vacuum Tube To Keep The Rest Of The Track In A Vacuum. Then The Track opens To let The Air Into The loading Dock. Then The Door Opens To The Shuttle Craft and The passengers Step Out. The Shuttle Craft Is Reloaded and Travels Back To It's Origin.

These Bus like Shuttle Craft could Have One Leaving A Station Every 5 or 10 Min, and Arriving In A Line Up On The Opposite End. There Could Be 6 Unloading and Loading Docks At Each Station To Keep Timing Accurate.